AMN 233114 MULTIPURPOSE ARMORED VEHICLE Tiger-M

Parameters / Modification

STS

AMN

ASN

Vehicle type

wheeled, armored

wheeled, armored

wheeled, armored

Curb weight, kg (with spare wheel, tool, refueling, without additional and special equipment), permissible weight deviation plus 3%

6,400

6,600

6,880

Fully loaded mass, kg (mass of the equipped product with the transported cargo, crew, additional and special equipment), permissible mass deviation plus 3%

7,600

7,800

8,080

Fully loaded mass of the towed trailer on all types of terrain road, kg, not more than

—

2,500

2,500

Number of seats

6

9

6

Transportability

products can be transported by rail, road, water and air transport or on their own

Parameters / Modification

STS

AMN

ASN

Length, mm, maximum

5,700

5,600

5,600

Width, mm, maximum

2,400

Front / rear wheel track, mm

1,840±20/1,840±20

Height, mm, maximum

2,500

2,500

2,500

Ground clearance, mm 

400

2,500

2,500

Base, mm

3,300±20

3,300±20

3,300±20

Entry angle, degree, minimum

36

34

34

Departure angle, degree, minimum

40

36

36

External overall radius of product rotation along the outer end of the front bumper, m, not more than

10.5

Parameters / Modification

STS

AMN /ASN

Maximum road speed at full weight without time limit, km / h, not less than

120

110

Maximum road speed at full weight // time limit, km / h // min.

125//10

120//10

Maximum speed of the road train, km / h // min

—

in accordance with the normative and technical documentation for the trailer

Acceleration time of the product from standstill to speed of 80 km / h, s, not more than

25

25

Parameters / Modification

СТС/AMH/AСH

Control fuel consumption, l / 100 km of the way when driving at a constant speed of 60 km / h, l, not more than

13,6

Cruising range for control fuel consumption, km, not less than

1,000

Parameters / Modification Modification

STS / AMN /ASN

Maximum rise overcome by the product,% (deg.), not less than:

• with the full weight of the product
• with the full mass of the road train

60 (31)

36 (20)

The greatest angle of the side-long slope overcome by the product with the full mass on the dry and hard ground, degree,  not less than

20
(Short-term, up to 10 minutes, operation of the product is allowed with longitudinal tilts up to 35 ° and with lateral rolls up to 25 °)

The greatest height of the vertical wall, when overcome by the product, m, not less than

0.4

The greatest width of the moat overcome by the product, m, not less than

0.5

Angle of lateral static stability of the product with full mass, degree, not less than

33

depth of the ford with a hard bottom, taking into account the wave height (not from the movement of the product) at the nominal pressure in tires without preliminary preparation, m, not more than

1.2

Parameters / Modification

STS

AMN

ASN

AK-47 assault rifle

—

9

2

Machine gun 12.7 mm infantry 6P50-1 Kord, with bipods, pcs.

1

—

1

Ammunition for the 6P50-1 Kord machine gun, cartridges, boxes

500 (10)

—

500 (10)

SSC sight (standard in a standard case) for 6P50-1 Kord machine gun, pcs.

1

—

1

AGS-17 grenade launcher, pcs

1

—

1

Ammunition of the AGS-17 grenade launcher shots (boxes)

290 (10)

—

290 (10)

AGS-17 grenade launcher sight (standard in a standard case), pcs.

1

—

1

7.62-mm machine gun PK, or PKM, or 6P41 (Pecheneg), pcs.

1

—

1

Ammunition for a 7.62 mm machine gun, cartridges (boxes), pcs.

1600 (8)

—

1600 (8)

1PN93 sight for a 7.62 mm machine gun (in a standard case), pcs.

1

—

1

RPG-26, pcs.

4

—

4

Parameters / Modification

STS

AMN

ASN

Mounting 6У16, pcs.

1

—

1

Cartridge boxes with belts / case collector (box) and used link compartment, for 6P50-1 Kord machine guns, pcs.

10/2

—

10/2

Case for 6P50-1 Kord machine guns installed in combat mode, pcs.

1

—

1

Mounting for SAG-17 grenade launcher (from the AGS-17 kit), pcs.

1

—

1

Mounting P6.2303Sb1 of the AGS-17 grenade launcher fastenings on a repeated platform, pcs.

10/1

—

10/1

P6.2303.4 stand

1

—

1

P6.2303Sb.5 body

1

—

1

Boxes for shots with belts / case collector (box) P62305Sb6 for AGS-17 grenade launcher, pcs.

1

—

1

Mounting 6U1, pcs.

1

—

1

Cartridge boxes (for 200 cartridges) with belts for the 7.62-mm machine gun, pcs.

8

—

8

Case collector (box) for the 7.62-mm machine gun (from PKMB kit), pcs.

1

—

1

Case for 7.62mm machine gun installed in combat mode, pcs.

1

—

1

Parameters / Modification

STS

AMN

ASN

Night vision devices PNV-10T or 1PN105, pcs.

2

2

2 (only PNV-10T)

Parameters / Modification

STS

AMN / ASN

Engine

Brand

Cummins

YaMZ

Model

V 205

5347-10 / 5347-11
for equipment with / without air conditioning

Type

diesel, four-stroke, liquid-cooled, turbocharged, with intercooled charge air

diesel, four-stroke, liquid-cooled, turbocharged, with intercooled charge air

Execution

multi-fuel in accordance with GOST RV 52248

multi-fuel in accordance with GOST RV 52248

Number of cylinders

6

4

Cylinder arrangement

inline

inline

Cubical capacity, l

5.9

4.43

Maximum power, hp / min.^-1

205/2600

215/2600

Maximum torque, N.m / min^-1

705/1500

735/1,400...1,700

Engine lubrication system

combined (under pressure and spray), equipped with a water-oil heat exchanger.

combined (under pressure and spray), equipped with a water-oil heat exchanger.

Oil filter type

full-flow, cartridge type with replaceable filter element

full-flow, cartridge type with replaceable filter element

Air supply system

gas turbine, with one turbocharger and charge air intercooler

gas turbine, with one turbocharger and charge air intercooler

Air filter type

with dry replaceable filter element and electric dust sensor

with dry replaceable filter element and electric dust sensor

Fuel supply systems

double-circuit, low and high pressure with a single-piston high-pressure fuel pump of the distribution type.

battery-type, high energy injection, electronically controlled and electrically driven centrifugal fuel priming pump.

Number and volume of fuel tanks, l

2 x68⁺²

2 x68⁺²

Gas exhaust system

-

with auxiliary brake

Engine cooling system

liquid, closed type, with forced circulation of coolant, radiator, fan, expansion tank and viscous clutch in the fan drive

liquid, closed type, with forced circulation of coolant, radiator, fan, expansion tank and viscous clutch in the fan drive

Compressor, type

piston, single-cylinder

piston, single-cylinder

Compressor capacity, l / min, at engine speed, rpm

460/2600

350/2600

Device to facilitate starting a cold engine

intake air heater

intake air heater

Prestarting heater

PZD-12G

APZhD20D-24-T

Nominal heating capacity of prestarting heater, kW

12

20

Parameters / Modification

STS

AMN / ASN

Clutch

Type

single-disk, dry, frictional, with a torsional vibration damper on the driven disk and peripheral arrangement of springs

single-disk, dry, frictional, spring-friction damper with idle speed damper, with diaphragm pressure spring

Clutch drive

hydraulic with pneumatic booster

hydraulic with pneumatic booster

Gearbox

Type

mechanical, three-way, five-speed with constant gear mesh and synchronizers in the 2^nd, the 3^rd, the 4^th and the 5^th gears

mechanical, three-way, five-speed with constant gear mesh and synchronizers in the 2^nd, the 3^rd, the 4^th and the 5^th gears

Gear ratios

1^st gear - 5.714

2^nd gear - 3.083

3^rd gear - 1.939

4^th gear - 1.228

5^th gear - 1,000

Reverse - 4.935

1^st gear - 5.714

2^nd gear - 3.083

3^rd gear - 1.939

4^th gear - 1.228

5^th gear - 1,000

Reverse - 4.935

Power transfer unit

Type

mechanical, two-stage, with an interaxle locking differential

mechanical, two-stage, with an interaxle locking differential

Gear ratios

low gear - 1.430
top gear  - 0.667

low gear - 1.430
top gear  - 0.667

Cardan drive

Type

open type, with cardan joints on needle bearings and end intersecting teeth on the flanges

open type, with cardan joints on needle bearings and end intersecting teeth on the flanges

Driving axles

Gear type

spiral bevel gears

bevel gears with circular tooth

Differential type

cam increased friction

bevel gear positively locked

Wheel reducers

Type

single-stage with helical cylindrical gears

single-stage with helical cylindrical gears

Gear ratio

2.83

2.83

Parameters / Modification

STS / AMN / ASN

Frame

Type

stamped, welded, with channel section spars connected by cross members

Hopper devices and accessories

In the front

two towing eyes and two towing hooks

At the rear

towing hitch with double-acting rubber shock absorber

Propeller

Type

wheeled, with 4x4 wheel arrangement, with adjustable tire pressure

Wheels

Type

with split rims with dimension 12.00R18 (227x475)

Number of wheels

5 including 1 spare one

Tires

Type

pneumatic chamber radial with adjustable pressure and directional tread pattern 12.00R18 KI-115AM

Tire pressure control system

Type

centralized, automatic with electronic control unit

Tire pressure measurement limits, kPa (kgf / cm²)

from 90 (0.9) to 495 (4.95)

Suspension

Type

Independent, torsion bar, wishbone, with six hydraulic telescopic shock absorbers and two anti-roll bars

Parameters / Modification

STS / AMN / ASN

Type

screw-ball nut

Gear ratio

23.09

Power steering

hydraulic with gear pump

Parameters / Modification

STS / AMN / ASN

Service

double-circuit with pneumohydraulic drive

Brake gears

shoe, drum type, sealed

one of the circuits of the service brake system

Parking

transmission with a mechanical drive, with a fork unclamping mechanism; brake gear - shoe, drum type

Parameters / Modification

STS / AMN / ASN

Type, brand

electric, Evacuator ELA-4000-24

Maximum traction force kN (kgf)

39.24 (4000) ±20%

Rope length, not less than, m

20

Parameters / Modification

STS / AMN / ASN

Type

single-wire, with connection of negative leads to the case

Rated voltage, V

24

Consumers’ power supply of with voltage 12V

total consumption not less than 20A

Quantity, pcs., and battery capacity 

2,100 ampere-hour each

Parameters / Modification

STS

AMN

ASN

Radio station R-168-25-UE-2

—

1

—

Parameters / Modification

STS

AMN

ASN

Body (hull) type

armored, welded from steel sheets

armored, welded from steel sheets

armored, welded from steel sheets

Swivel platform for mounting the main armament

1

—

1

Square hatch

—

1

—

Protection class of the crew, main assemblies of units and systems from small arms bullets in accordance with:

·         GOST R 50969-96 and GOST 51136-98, (with circular fire from an AKM submachine gun, a PS bullet of 7.62 mm caliber and from an AK-47 submachine gun with a PS bullet of 5.45 mm caliber, a roof with roll and trim angles up to 20 °);

·         General Technical Requirements 9.1.12.1.

3

—

3

—

—

1

Providing mine protection for the crew and maintaining mobility:

·         when an anti-personnel mine is detonated under any wheel with an explosive mass in TNT equivalent, kg, not less than

·         when undermined under the bottom of a grenade type

·         in case of explosion under any wheel and bottom of an explosive (in TNT equivalent), kg

·         according to General Technical Requirements 9.1.12.1

0.3

F1

—

—

—

—

0.6

—

—

—

—

1

Parameters / Modification

STS

AMN

ASN

Tucha 902G System (4 guides, 2 on each side in the movement direction)

—

—

1

Lightproof devices in accordance with GOST V 25759 on the windshields of the cab, set

1

1

1

Light-protective curtains on glasses (except for windscreens) of the cab and salon, set

1

1

1

Camouflage and blackout devices in accordance with GOST RV 50912, set

1

1

1

Dyeing type

deforming

Parameters / Modification

STS / AMN  / ASN

External noise level, generated by the product, determined in accordance with GOST R 41.51 (Regulation No. 51-01 UNECE), dB (A), not more

82

Maximum permissible noise level in the product cabin, according to GOST B 21950, dB (A), no more than

85

Parameters / Modification

STS

AMN

ASN

Air conditioning system

Air coolers front and rear

installation as an option

installation as an option

included in the basic package

Filter ventilation unit

FVUA-100A-24 common exchange type installation

—

installation as an option

—

Parameters / Modification

STS / AMN / ASN

Spare parts single set

complete composition of a single set of spare parts and accessories and its location in the products is presented in the List of spare parts for Spare parts-0, which is part of the List of operation papers

Set of operation papers

in accordance with the List of operation papers (LOP)